Chromatography Autosampler Vial Caps Only
Microsolv Technology Corporation Caps, Screw Top, with White Silicone Rubber / Natural PTFE Septa, fitted in "knurled", polypropylene, Black Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS.
This is our most economical, lowest cost Screw Cap for Autosampler Vials. Natural PTFE is as equally inert and durable as Red PTFE, but no dyes have been added.
Microsolv Technology Corporation Caps, Screw Top, with White Silicone Rubber / White PTFE, ultra-low bleed Septa, bonded in "knurled", polypropylene, Dark Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK
This very high purity Septa has low extractables and is excellent choice for HPLC. Compares to "Certified" Brands.
Microsolv Technology Corporation Caps, Snap Top, with 0.04" thick, White Silicone Rubber / Natural PTFE Pre-Slit Septa, fitted in smooth, polyethylene, Yellow Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Pre-Slit Septa are normally recommended for Waters Alliance and Acquity instruments.Natural Septa does not have any color pigment and will not introduce extractables.
Microsolv Technology Corporation Caps, Snap Top, with 0.04" thick, White Silicone Rubber / Natural PTFE Pre-Slit Septa, fitted in smooth, polyethylene, Light Blue Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
Pre-Slit Septa are normally recommended for Waters Alliance and Acquity instruments.Natural Septa does not have any color pigment and will not introduce extractables.
Microsolv Technology Corporation Caps, Snap Top, with Soft-Guard, White Silicone Rubber / Red PTFE Pre-Slit Septa, fitted in smooth, polyethylene, Red Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
Soft-Guard™ Septa provide easier penetration of autosampler needles and better resealing than other brands, for longer instrument up-time and fewer missed injections. Pre-Slit Septa are normally recommended for Waters Alliance and Acquity instruments.
Microsolv Technology Corporation Caps, Screw Top, with PTFE / Silicone Rubber / PTFE Septa, fitted in "knurled", polypropylene, Green Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.
This septa was designed for specific, older instruments such as Agilent 1050 and to provide extra cleaning when "wiping" a needle. Also provides a small degree of better resealing after injection compared to Silicone Rubber / PTFE Septa.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Pre-Slit Septa, fitted in "knurled", polypropylene, Black Caps. For use with 8-425mm thread, 12x32mm autosampler vials. 100/PK.
Wider hole for use with narrow mouth, 2ml vials. Wider hole provides a larger target area for the autosampler needle during injection.
Microsolv Technology Corporation Caps, Snap Top, with 0.04" thick, White Silicone Rubber / Natural PTFE Pre-Slit Septa, fitted in smooth, polyethylene, Natural Transparent Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Pre-Slit Septa are normally recommended for Waters Alliance and Acquity instruments. Natural Septa does not have any color pigment and will not introduce extractables.
Microsolv Technology Corporation Caps, Screw Top, with Soft-Guard, White Silicone Rubber / Red PTFE Septa, bonded in "knurled", polypropylene, Red Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS
Soft-Guard™ Septa are easier to penetrate by autosampler needles, and re-seals better than other Caps on the market. This provides longer instrument up-time, fewer missed injections and more consistent data. Use for HPLC, GC, LCMS or GCMS. Click HERE for more information about Soft-Guard™ Septa Technology.
Microsolv Technology Corporation Caps, Screw Top, with Soft-Guard, White Silicone Rubber / Red PTFE Pre-Slit (Y Shape) Septa, fitted in "knurled", polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK
Pre-slit for easy penetration by autosampler needles. Recommended for Waters Alliance & Acquity instruments. Y Shape Pre-Slit provides a greater target area for needles and are easier to penetrate but do not reseal as well as single slit septa. Soft-Guard™ Septa are easier to penetrate by autosampler needles, and re-seals better than other Caps on the market. This provides longer instrument up-time, fewer missed injections and more consistent data. Use for HPLC, GC, LCMS or GCMS.
Microsolv Technology Corporation Caps, Screw Top, with Soft-Guard, White Silicone Rubber / Red PTFE Septa, bonded in "knurled", polypropylene, Black Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS
Soft-Guard™ Septa are easier to penetrate by autosampler needles, and re-seals better than other Caps on the market. This provides longer instrument up-time, fewer missed injections and more consistent data. Use for HPLC, GC, LCMS or GCMS. Click HERE for more information about Soft-Guard™ Septa Technology.
Perkin Elmer US LLC 13 mm Black Phenolic Screw Cap for Waste and Wash Vial
Vial Top Type Neck I.D. Size Cap Material Cap Type Quantity Screw Top 13 mm Phenolic Waste and Wash 1
Leap PAL Parts La-Pha-Pack , Cap, Screw, Black, 10mm Pre-slit, 1.5mm, White Silicone/Blue PTFE, Combination Seal, 100 Pack. Made in Germany.
La-Pha-Pack , Cap, Screw, Black, 10mm Pre-slit, 1.5mm, White Silicone/Blue PTFE, Combination Seal, 100 Pack. Made in Germany.
Leap PAL Parts Headspace Magnetic Cap Screw 18mm Silicone/PTFE 3.0mm, 100 Pack
Cap, Screw, Headspace, Magnetic With septa, Silicone/PTFE - 3.0mm, 100 Pack
Leap PAL Parts Headspace Magnetic Cap Crimp 5mm hole, 20mm Black Butyl, 100 Pack
L-MARK Brand Cap Crimp 20mm 3.0mm Black Butyl Magnetic With 5mm hole100 Pack